From new construction cladding to emergency storm repairs, Forge Siding delivers field-tested Siding across Fulton and the surrounding TX service area. Call today for a free on-site estimate.
What separates our Fulton operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across TX. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Licensed, bonded, and carrying full general liability plus workers' compensation in TX — not because it's optional, but because those protections matter for homeowners who invite a crew onto their property. Ask for our certificate of insurance before signing anything; we provide it without hesitation.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Water staining on drywall near exterior walls is one of the clearest indicators of a failed building envelope. By the time interior damage is visible, moisture has usually been active behind the cladding for weeks or months.
Buckled panels rarely fix themselves. The deformation increases with each heat cycle, and the gap at the panel lock grows. This is one of those issues that gets significantly more expensive if ignored.
Exterior paint peeling within two to three years of a repaint is almost always a substrate or back-priming issue. We diagnose the cause before recommending a fix.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Our Fulton, TX team handles the full range of residential and commercial cladding work, from single-panel repairs to complete building envelope re-siding.
Installation quality determines how long your siding actually lasts. The product you choose matters, but the installation practice matters more: correct expansion gaps, back-primed field cuts, properly integrated housewrap, and flashing that doesn't cut corners at rough openings. Our Fulton crews treat those details as non-negotiable, not optional.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in TX and understand what documentation a claim requires.
Each cladding material has its own installation requirements, failure modes, and maintenance profile — and a crew that treats them all identically is a crew that will make material-specific mistakes. Our Fulton, TX specialists understand fiber cement's silica cutting protocols and back-priming requirements, vinyl's thermal expansion characteristics and lock-engagement tolerances, and wood's moisture content sensitivity and end-grain sealing needs. We don't sell you a product and then install it generically.
Property managers and HOA boards working with us get a dedicated project point of contact, building-by-building scheduling, and standardized documentation — including permit records, warranty registrations, and post-project photo files — formatted for HOA board records and reserve fund reporting.
Siding doesn't end at the wall panels. Soffit, fascia, corner posts, J-channel, window and door trim, and all penetration accessories are part of the building envelope — and failing trim is one of the most common moisture entry points we encounter. Our Fulton, TX crews handle the complete trim system as part of every installation, not as an optional add-on. Vinyl soffit and fascia wrap, HardieTrim boards, and aluminum-capped fascia are all in our scope.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Fulton, TX homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
These aren't marketing claims. They're the operational commitments our Fulton, TX clients reference when they recommend us to their neighbors.
Our written estimates don't disappear after the handshake. They become the contract, and the final invoice reflects the estimate scope. If something changes, we issue a written change order before doing additional work.
We don't schedule jobs we can't start within a reasonable window. If our current backlog means a delay, we tell you upfront and give you realistic dates — not optimistic ones.
An unlicensed crew on your property creates liability exposure for you, not just for them. Our credentials are public record and we never hesitate to provide documentation.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
A crew that leaves a clean site every evening is a crew that respects the property they're working on. Our standard includes daily cleanup as a non-negotiable part of the project schedule.
Every Forge Siding project in Fulton, TX closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
A predictable process reduces stress and produces better results. Here's exactly what happens when you contact our Fulton, TX team.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in TX, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
Surprises are handled on your schedule, not ours. We document unexpected findings with photos, give you the repair cost in writing, and proceed only with your explicit sign-off.
The walkthrough isn't a formality. If anything isn't right, we note it and fix it before considering the project closed. Our reputation runs on completed projects, not signed contracts.
We back every Siding project in TX with a written workmanship warranty. The warranty period, covered defects, and resolution process are all spelled out before we start. No fine print that swallows the coverage.
Call +1-844-782-0929 to Get StartedThree bids, three different approaches. Forge Siding was the only contractor who showed up with a moisture meter at the estimate visit and flagged elevated readings behind our north-facing panels before we even discussed product. That kind of diagnostic thoroughness sold us immediately.
Emergency call on a Saturday night after wind blew off eight panels on the back wall. Someone actually answered. Crew was on site Sunday morning, boarded up the exposed section, and had permanent panels installed by Tuesday. I'd been skeptical of "24/7" claims from other contractors — this is what it actually looks like.
I manage a 34-unit HOA community in Fulton, TX. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Our Fulton-based team handles every project in the service area — meaning the same crew that handles a large commercial contract is available for residential repairs in surrounding communities. Proximity matters for response time, familiarity with local inspectors, and the practical ability to return quickly if any post-project follow-up is needed.
Serving zip codes: 78358 78382
Reach our Fulton dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 Call +1-844-782-0929 — Free Estimate